? semiconductor components industries, llc, 2016 february, 2016 ? rev. 1 1 publication order number: NTMFS5C628NL/d NTMFS5C628NL power mosfet 60 v, 2.4 m , 150 a, single n?channel features ? small footprint (5x6 mm) for compact design ? low r ds(on) to minimize conduction losses ? low q g and capacitance to minimize driver losses ? these devices are pb?free and are rohs compliant maximum ratings (t j = 25 c unless otherwise noted) parameter symbol value unit drain?to?source v oltage v dss 60 v gate?to?source v oltage v gs 20 v continuous drain current r jc (notes 1, 3) steady state t c = 25 c i d 150 a t c = 100 c 110 power dissipation r jc (note 1) t c = 25 c p d 110 w t c = 100 c 56 continuous drain current r ja (notes 1, 2, 3) steady state t a = 25 c i d 28 a t a = 100 c 20 power dissipation r ja (notes 1 & 2) t a = 25 c p d 3.7 w t a = 100 c 1.9 pulsed drain current t a = 25 c, t p = 10 s i dm 900 a operating junction and storage temperature t j , t stg ?55 to +175 c source current (body diode) i s 120 a single pulse drain?to?source avalanche energy (i l(pk) = 9 a) e as 565 mj lead temperature for soldering purposes (1/8 from case for 10 s) t l 260 c stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. thermal resistance maximum ratings parameter symbol value unit junction?to?case ? steady state r jc 1.3 c/w junction?to?ambient ? steady state (note 2) r ja 40 1. the entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. surface?mounted on fr4 board using a 650 mm 2 , 2 oz. cu pad. 3. maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. marking diagram www. onsemi.com 5c628l = specific device code a = assembly location y = year w = work week zz = lot traceability 5c628l aywzz v (br)dss r ds(on) max i d max 60 v 2.4 m @ 10 v 150 a 3.3 m @ 4.5 v g (4) s (1,2,3) n?channel mosfet d (5) s s s g d d d d dfn5 (so?8fl) case 488aa style 1 1 see detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. ordering information
NTMFS5C628NL www. onsemi.com 2 electrical characteristics (t j = 25 c unless otherwise specified) parameter symbol test condition min typ max unit off characteristics drain?to?source breakdown voltage v (br)dss v gs = 0 v, i d = 250 a 60 v drain?to?source breakdown voltage temperature coefficient v (br)dss / t j 26 mv/ c zero gate voltage drain current i dss v gs = 0 v, v ds = 60 v t j = 25 c 10 a t j = 125 c 250 gate?to?source leakage current i gss v ds = 0 v, v gs = 20 v 100 na on characteristics (note 4) gate threshold voltage v gs(th) v gs = v ds , i d = 135 a 1.2 2.0 v threshold temperature coefficient v gs(th) /t j ?5.0 mv/ c drain?to?source on resistance r ds(on) v gs = 10 v i d = 50 a 2.0 2.4 m v gs = 4.5 v i d = 50 a 2.6 3.3 forward transconductance g fs v ds = 15 v, i d = 50 a 110 s charges and capacitances input capacitance c iss v gs = 0 v, f = 1 mhz, v ds = 25 v 3600 pf output capacitance c oss 1700 reverse transfer capacitance c rss 28 total gate charge q g(tot) v gs = 4.5 v, v ds = 48 v; i d = 50 a 24 nc total gate charge q g(tot) v gs = 10 v, v ds = 48 v; i d = 50 a 52 threshold gate charge q g(th) v gs = 4.5 v, v ds = 48 v; i d = 50 a 6.0 gate?to?source charge q gs 12 gate?to?drain charge q gd 4.5 plateau voltage v gp 3.0 v switching characteristics (note 5) turn?on delay time t d(on) v gs = 4.5 v, v ds = 30 v, i d = 50 a, r g = 2.5 15 ns rise time t r 150 turn?off delay time t d(off) 28 fall time t f 70 drain?source diode characteristics forward diode voltage v sd v gs = 0 v, i s = 50 a t j = 25 c 0.8 1.2 v t j = 125 c 0.75 reverse recovery time t rr v gs = 0 v, dis/dt = 100 a/ s, i s = 50 a 55 ns charge time t a 28 discharge time t b 28 reverse recovery charge q rr 60 nc product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. 4. pulse test: pulse width 300 s, duty cycle 2%. 5. switching characteristics are independent of operating junction temperatures.
NTMFS5C628NL www. onsemi.com 3 typical characteristics 0 50 100 250 0 1.0 2.0 2.5 3.0 4.0 figure 1. on?region characteristics figure 2. transfer characteristics v ds , drain?to?source voltage (v) v gs , gate?t o?source voltage (v) figure 3. on?resistance vs. gate?to?source voltage figure 4. on?resistance vs. drain current and gate voltage v gs , gate?t o?source voltage (v) i d , drain current (a) figure 5. on?resistance variation with temperature figure 6. drain?to?source leakage current vs. voltage t j , junction temperature ( c) v ds , drain?to?source voltage (v) i d , drain current (a) i d , drain current (a) r ds(on) , drain?to?source resistance (m ) r ds(on) , drain?to?source resistance (m ) r ds(on) , normalized drain?to? source resistance i dss , leakage (na) t j = 125 c t j = 25 c t j = ?55 c t j = 25 c i d = 50 a t j = 25 c v gs = 4.5 v v gs = 10 v v gs = 10 v i d = 50 a t j = 125 c t j = 85 c v ds = 5 v t j = 175 c v gs = 4.0 v to 10 v 2.8 v 3.2 v 0 25 75 125 175 200 250 0 1.0 2.0 3.0 4.0 3.6 v 1 2 3 4 5 6 7 8 9 23 4 5 6 8 910 3.0 0 60 80 160 2.4 2.6 2.0 1.8 1.6 100 0.6 2.0 ?50 ?25 0 25 50 75 100 125 150 175 1.e+01 515 35 55 50 100 150 225 200 150 7 2.8 20 40 120 140 0.8 1.0 1.2 1.4 1.6 1.8 25 45 2.4 v 3.5 1.5 0.5 2.2 25 75 225 175 125 1.e+02 1.e+03 1.e+04 1.e+05 1.e+06
NTMFS5C628NL www. onsemi.com 4 typical characteristics figure 7. capacitance variation figure 8. gate?to?source vs. total charge v ds , drain?to?source voltage (v) q g , total gate charge (nc) figure 9. resistive switching time variation vs. gate resistance figure 10. diode forward voltage vs. current r g , gate resistance ( ) v sd , source?to?drain voltage (v) figure 11. maximum rated forward biased safe operating area figure 12. maximum drain current vs. time in avalanche v ds , drain?to?source voltage (v) t av , time in avalanche (s) c, capacitance (pf) v gs , gate?t o?source voltage (v) t, time (ns) i s , source current (a) i d , drain current (a) i peak , drain current (a) v gs = 0 v t j = 25 c f = 1 mhz c iss c oss c rss v ds = 48 v t j = 25 c i d = 50 a q gs q gd v gs = 4.5 v v ds = 30 v i d = 50 a t d(off) t d(on) t f t r t j = 125 c t j = 25 c t j = ?55 c t j (initial)= 25 c r ds(on) limit thermal limit package limit t c = 25 c v gs 10 v single pulse 0.1 100 1000 10000 0102030 60 0 2 4 6 8 10 0204050 10 100 1 10 100 10 0.3 0.4 0.6 0.7 0.8 1.0 1000 1 10 100 0.1 100 10 1 0.1 0.01 1 10 100 1.e?05 10 10 30 1 3 5 7 9 v gs = 0 v 100 1 0.1 t j (initial)= 100 c q t 40 50 1 0.5 0.9 1.e?04 1.e?03 1.e?02 500 s 1 ms 10 ms
NTMFS5C628NL www. onsemi.com 5 typical characteristics 0.001 0.1 1 10 100 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 figure 13. thermal characteristics pulse time (sec) r ja , effective transient thermal resistance ( c/w) single pulse 50% duty cycle 20% 10% 5% 2% 1% 0.01 device ordering information device marking package shipping ? NTMFS5C628NLt1g 5c628l dfn5 (pb?free) 1500 / tape & reel NTMFS5C628NLt3g 5c628l dfn5 (pb?free) 5000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
NTMFS5C628NL www. onsemi.com 6 package dimensions dfn5 5x6, 1.27p (so?8fl) case 488aa issue l style 1: pin 1. source 2. source 3. source 4. gate 5. drain m 3.00 3.40 0 ??? 3.80 12 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeter. 3. dimension d1 and e1 do not include mold flash protrusions or gate burrs. 1234 top view side view bottom view d1 e1 d e 2 2 b a 0.20 c 0.20 c 2 x 2 x dim min nom millimeters a 0.90 1.00 a1 0.00 ??? b 0.33 0.41 c 0.23 0.28 d 5.15 d1 4.70 4.90 d2 3.80 4.00 e 6.15 e1 5.70 5.90 e2 3.45 3.65 e 1.27 bsc g 0.51 0.61 k 1.20 1.35 l 0.51 0.61 l1 0.125 ref a 0.10 c 0.10 c detail a 14 l1 e/2 8x d2 g e2 k b a 0.10 b c 0.05 c l detail a a1 e 3 x c 4 x c seating plane max 1.10 0.05 0.51 0.33 5.10 4.20 6.10 3.85 0.71 1.50 0.71 m *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 1.270 2x 0.750 1.000 0.905 4.530 1.530 4.560 0.495 3.200 1.330 0.965 2x 2x 4x 4x pin 5 (exposed pad) 5.00 5.30 6.00 6.30 pitch dimensions: millimeters 1 recommended on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any product s herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any part icular purpose, nor does sci llc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 NTMFS5C628NL/d literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
